Speaker Bose L1 Pro32 Portable Line Array System with Sub2 Powered Bass Module

With the supreme clarity and output of a 32-driver articulated line array, the L1 Pro32 with Sub1 Powered Bass Module offers 180-degree horizontal coverage and the most focused vertical coverage pattern and highest SPL over distance in an L1 ever—providing intricate sonic detail, clarity and consistency, even off to the extreme sides in larger venues. For DJs, singer-songwriters, bands—and your audience—the L1 Pro32 offers a truly superior experience. It gives you the power to sound your best and simply perform.

Give your songs full impact. Sub2 Powered Bass Module combines with virtually any portable PA to deliver low end down to 37 Hz. Sub2 plays lower and louder, giving you bold bass that goes almost anyhere. Stack two Sub2 subwoofers for even more bass or to unleash Cardioid Mode for focused, directional performance that negates rear-firing bass energy, steers the bass out front, and reduces feedback.

Setup

1. Place the L1 Pro32 system and Sub2 subwoofer on a flat, sturdy stage floor, facing the audience.
2. Turn off all equipment before wiring the mixer, L1 Pro32, and Sub2.
3. If using 2 Sub2 units, stack them securely following Bose's instructions for more bass or to use Cardioid Mode.

Use and Tuning

1. Turn on the mixer and source first, then the L1 Pro32 and Sub2; start with the volume low and raise it gradually.
2. Walk around the room, including both edges, to check that the sound is even.
3. If the stage has too much bass spill or is prone to feedback, switch to Cardioid Mode with 2 Sub2 units.

Care

• Wipe the speakers with a soft, dry cloth; don't use harsh cleaning chemicals.
• Pack and transport carefully, avoiding impact to the line array.
• Turn off, unplug, and store in a dry place when not performing.