Sub2 Powered Bass Module

Give your songs full impact. The Sub2 Powered Bass Module pairs with virtually any portable PA system to deliver deep, powerful low-end down to 37 Hz. Sub2 plays lower and louder, delivering bold bass performance that can go almost anywhere.

Stack two Sub2 subwoofers for even greater bass output or activate Cardioid Mode for focused, directional low-frequency control. This mode reduces rear-firing bass energy, directs bass forward toward the audience, and helps minimize unwanted feedback.

Setup

1. Place the Sub2 on a sturdy floor, facing the audience.
2. Power off all equipment, then connect the Sub2 to your portable PA speaker system.
3. If using 2 Sub2 units, stack them straight and secure before powering on.

Use

1. Turn on the source and main speakers first, then turn on the Sub2 at a low volume and raise it gradually.
2. Turn on Cardioid Mode when you want to push bass toward the audience and reduce bass spill behind.
3. If feedback occurs, try turning on Cardioid Mode and lowering the volume before slowly raising it again.

Care

• Wipe the housing with a soft, dry cloth; keep water out of the speaker when used outdoors.
• When moving, lift the speaker carefully and don't place heavy objects on it.
• Store the speaker in a dry place and unplug when not in use for long periods.