Speaker Tripod HQsing HD123

10-pound maximum weight capacity; adjustable height (4.1 to 6.6 feet); sturdy, expandable, long tripod legs provide stability in any environment
Constructed with a durable steel tube for reliable strength; upper shaft measures 1.4 inches (35mm) in diameter; If the inner diameter of speaker bottom hole is 38mm, then need to purchase an additional 35mm to 38mm adapter

***

DIMENSIONS:

CONTACT US, WE OFFER 24/7 CUSTOMER SERVICE!!!

Assembly

1. Spread the three tripod legs fully on a flat floor and lock the leg joint.
2. Loosen the shaft lock, raise the upper tube to the desired height between 4.1 and 6.6 feet, then tighten it again.
3. Fit the speaker's 35mm pole socket onto the upper tube; speakers with a 38mm socket need a 35mm-to-38mm adapter first.

Use

1. Only mount speakers within the stand's 10-pound load rating.
2. Point one tripod leg toward the front of the speaker for better stability.
3. Run the speaker cable along the stand and keep it from crossing walkways.

Care

• Take the speaker down before collapsing or moving the stand.
• Wipe the steel tubes with a dry cloth and store in a dry place to prevent rust.
• Check the locks and joints regularly and retighten if loose.